領域 MC-WWT · 工業廢水處理
工業廢水 處理工程
為印刷、電子和製造業提供完整廢水處理系統——化學沉澱、膜過濾、污泥脫水和中水迴用迴路，工程設計滿足當地排放標準。
≥95%
COD 去除率
60%
迴用比例
16-36 wks
建設週期
為印刷、電子和製造業提供完整廢水處理系統——化學沉澱、膜過濾、污泥脫水和中水迴用迴路，工程設計滿足當地排放標準。
pH adjustment, coagulation (alum/PAC), flocculation (polymer), and sedimentation for heavy metal and suspended solids removal.
Ultrafiltration (UF) and reverse osmosis (RO) for dissolved solids removal, with membrane cleaning automation and flux monitoring.
MBR (membrane bioreactor), MBBR, or activated sludge processes for COD/BOD reduction with nutrient removal (nitrogen/phosphorus).
Belt filter press, centrifugal dewatering, or filter press for sludge reduction to 20-30% dry solids, with sludge drying and disposal planning.
Tertiary treatment with activated carbon, UV disinfection, and RO polishing for process water reuse, reducing freshwater intake by up to 60%.
Real-time monitoring of flow, pH, COD, turbidity, chemical dosing, and pump status with automated alarm and reporting.
| Specification | Value | Notes |
|---|---|---|
| Treatment Capacity | Up to 500 m3/day | Modular, scalable |
| COD Removal | ≥ 95% | Chemical + biological |
| Heavy Metal Removal | ≥ 99% | Precipitation + filtration |
| Effluent COD | ≤ 50 mg/L | Discharge compliant |
| Water Reuse Ratio | Up to 60% | RO + UV polishing |
| Sludge Dry Solids | 20-30% | Belt press / centrifuge |
| Build Timeline | 16-36 weeks | From survey to handover |
| Certification | ISO 14001 | Environmental management |
現場採樣、流量測量及現有基礎設施與排放要求分析。
處理工藝選擇、設備選型、3D佈局及冗餘分析水力建模。
內部團隊執行機械、電氣及控制系統安裝，遵循FAT/SAT協議。
性能驗證、優化、操作員培訓及完整文件包。